VEGA VEGASON 51P…53P Profibus PA User Manual
Page 63
VEGASON 51P … 53P
63
Simulation
• Click to the menu "
Diagnostics/Simulation“
and choose the measurement loop.
Setup
The menu window "
Simulation of outputs“
opens. In this menu window you can simulate
the filling of the vessel or the measured value
and the indication display to any value (simu-
late measured value).
First of all, the actual measured value is dis-
played.
• Click to "
Start“ in the turquoise window
segment.
The grey scroll bar becomes active. With this
scroll bar you can change the measured
value to any value in the range of
-10 % … 110 % and thereby simulate the
filling or emptying of the vessel. In the input
box above the scroll bar you can enter any
percentage value of filling.
Note:
The simulated measured value is outputted
during adjustment with the PC until you stop
the simulation mode.