VEGA VEGASON 51P…53P Profibus PA - Manual (Page 62)

62 VEGASON 51P … 53P
Setup
Parameter adjustment sensor display
In the menu item "Outputs“ you choose the
scale and the unit in which your level should
be displayed.
• Choose in the main menu window "
Instru-
ment data parameter adjustment“ and then
the menu item "
Outputs“.
• In the menu window " Outputs“ click to
"
Display of measured value“.
The menu window " Sensor Display“ enables
the selection of the " Parameter“ and the "Unit“
(see also "8.2 Function diagram“).
• Click to "
Save“ to save the adjustment.
• If the adjustments should remain un-
changed, click to "
Quit“.
• Click in the menu window " Outputs“ to
"
Quit“ and you are in the menu window
" Instrument data parameter adjustment“.
• Click in the menu window " Instrument data
parameter adjustment“ again to "
Quit“.
Display of measured value
• Click in the main menu window to the menu
"
Display/Display of measured value“ and
choose the measurement loop or the sen-
sor which you want to have displayed.
• Choose in the line " Meas. value“ "
Distance“
and the sensor product distance will be
displayed. If you choose "
Scaled“, e.g. the
measured value will be displayed in liters
or volume percent.