VEGA VEGAFLEX 82 4 … 20 mA_HART two-wire Rod and cable probe With SIL qualification - Manual (Page 70)

70
10 Diagnostics and service
VEGAFLEX 82 • 4 … 20 mA/HART two-wire
44222-EN-130823
3
1
2 2
A B
45 mm (1.77"
)
150 mm (5.91"
)
70 mm (2.76"
)
150 mm (5.91"
)
Fig. 42: Shortening the cable probe
A Gravity weight - cable ø 4 mm
B Gravity weight - cable ø 6 mm
1 Pins
2 Thread M12 for eye-bolt
3 Pins
10.7 Software update
The following components are required to update the sensor soft-
ware:
•
Sensor
•
Voltage supply
•
Interface adapter VEGACONNECT
•
PC with PACTware
•
Current sensor software as file
You can find the actual sensor software as well as detailed infor-
mation of the procedure under "www.vega.com/downloads" and
"Software".
You can find information about the installation in the download file.
Make sure that you are using the correct software with SIL qualifica-
tion.
Instruments with SIL qualification can only be updated with a respec-
tive software. An accidental update with a wrong software version is
impossible.
Caution:
Instruments with approvals can be bound to certain software ver-
sions. Therefore make sure that the approval remains effective with a
software update.
You can find detailed information on www.vega.com/downloads and
"Approvals".