Ladder section assembly, Chapter 8: accessories – Grain Systems Tanks PNEG-4075 User Manual
Page 143
Advertising
Figure 8-14 Manway cover
A
Hinge base (MW-291)
G
Manway sill
B
Manway roof panel (CTR-0302)
H
Hinge leaf (MW-272)
C
5/16 x 3/4 in. hex bolt (S-275)
I
Manway cover (MW-008)
D
5/16 in. nut (S-396)
J
Latch (MW-271)
E
Latch base bracket (MW-289)
K
5/16 X 4 in. hex bolt (S-855)
F
Manway seal strip
L
5/16 in. nut (S-396)
Ladder Section Assembly
The inside ladder package consists of the ladder, starter brackets, standoff brackets, reinforcement straps,
and ending bracket. The ladder should to be assembled before installing it to the bin structure.
What You Should Know
When assembling ladder sections, ensure all slip resistant ladder rungs are oriented in the same direction.
Pneg-4075 75 Ft Diameter 40-Series Bin
143
Advertising