Grain Systems Tanks PNEG-4075 - Manual (Page 41)

Chapter 5: Base Angle Installation
Anchor Bolt Washer Installation
Anchor bolt washers help to cover the oversized hole in the base plate.
Before You Begin
Anchor bolts are secured, and base plates installed.
1. Place a square plate washer (B) onto the anchor bolt (A).
NOTE: A square plate washer (provided) must be installed between the base boot (C) and washer
(D).
2. Install a washer (D), and secure with a nut (E).
3. Tighten to the recommended torque specification, see Bolt Torque Specifications, page 24 .
Figure 5-4 Base stiffener assembly
A 3/4 in. bolt assembly package (B-4161) D 3/4 in. washer (S-866)
B
Square anchor plate washer (3/4 in. HT-635) ,
(1 in. B-6756)
E 3/4 in. nut (S-234)
C Base boot
Pneg-4075 75 Ft Diameter 40-Series Bin 41