Grain Systems Tanks PNEG-4075 - Manual (Page 72)

Chapter 7: Roof Assembly
Figure 7-4 Exploded view of eave angle (four roof panels)
A First eave angle (CTR-0187) H Eave bracket (CTR-0429)
B 5/16 in. flange nut (S-3611) I Outside top stiffener
C Second eave angle (CTR-0187) J Inside stiffener (CTS-2069XX)
D 5/16 x 1 in. flange bolt (S-10260) K Top of the top sidewall sheet
E Upper sidewall L Bottom of the top sidewall sheet
G Eave angle tab M Sidewall hole (For the first hole or the last hole of
the eave angle and inside stiffener).
F Optional eave seal (CRP-4800)
After You Finish
Continue this procedure for the remaining eave angles.
72 Pneg-4075 75 Ft Diameter 40-Series Bin