GE Industrial Solutions AF-650 GP DeviceNet - Manual (Page 33)

5.3.12 Class ID 0F4 Parameter Object
This object is an interface to the parameters of the drive. It identifies configurable parameters and supplies their description, including min. and max. values and
a descriptive text.
The attributes supported are listed below.
Attribute Access Stub/Full Name Data type Description
1 Set/Get Stub Parameter value Data type 1 Actual value of parameter
2 Get Stub Link path size USINT Size of link path
3 Get Stub Link path ARRAY DeviceNet's path to parameter's origin
Segment type/port BYTE
Segment Address Path
4 Get Stub Descriptor WORD Description of parameter
5 Get Stub Data type EPATH Data type code
6 Get Stub Data size USINT Number of bytes in parameter value
7 Get Full Parameter name
string SHORT
STRING Human readable text string representing parameter name
8 Get Full Units string SHORT
STRING Human readable text string representing parameter name
9 Get/Set Full Help string SHORT
STRING Human readable text string representing parameter name
10 Get Full Min value Data type 1 Min valid value
11 Get Full Max value Data type 1 Max valid value
12 Get Full Default value Data type 1 Parameters default value
13 Get Full Scaling multiplier UINT Multiplier for scaling factor
14 Get Full Scaling divisor UINT Divisor for scaling factor
15 Get Full Scaling base UINT Base for scaling formula
16 Get Full Scaling offset INT Offset for scaling formula
17 Get Full Multiplier link UINT Parameter instance of multiplier source
18 Get Full Divisor link UINT Parameter instance of divisor source
19 Get Full Base link UINT Parameter instance of base source
20 Get Full Offset link UINT Parameter instance of offset source
21 Get Full Decimal precision USINT Specifies parameter value format
1 = Same data type as the parameter.
5.3.13 Class ID 10h Parameter Group Object
This Object defines 14 parameter groups for all AF-600 FP and AF-650 GP parameters. One Class instance exists for each parameter group. A read out of an
instance will contain the name of the current parameter group.
Group Instance Name (max. 16 characters)
1 1 F U N D A M E N T A L P A R A
2 2 D I G I T A L I N O U T
3 3 F R E Q U E N C Y C O N T R O
4 4 M O T O R D A T A
5 5 H I G H P E R F P A R A M E
6 6 K E Y P A D S E T U P
7 7 A N A L O G I N O U T
8 8 B R A K I N G F U N C T I O N
9 9 O P T I O N S C O M M S
10 10 S P E C I A L F U N C T I O N
11 11 C A N F I E L D B U S
12 12 P I D C O N T R O L S
AF-600FP /650 GP DeviceNet Operating Instructions
32
5