To par. dn-23 cos filter 4, Par. dn-23 cos filter 4 – GE Industrial Solutions AF-650 GP DeviceNet User Manual
Page 44
DN-23 COS Filter 4
Range:
Function:
0 N/A*
[0 - 65535 N/A]
Sets up the filter mask for PCD 4. When operating in COS (Change-Of-State), it is possible to filter out bits
in PCD 4 that should not be sent if they change.
DN-31 Store Data Values
Option:
Function:
This parameter is used to activate a function that stores all parameter values in the non-volatile memory
thus retaining changed parameter values at power down.
[0] *
Off
The store function is inactive.
[1]
Store all setups
[2]
Store all setups
DN-33 Store Always
This parameter is used to select whether parameter data received via the DeviceNet option should always be stored in non-volatile memory.
Option:
Function:
[0] *
Off
[1]
On
DR-90 Alarm Word
Range:
Function:
0 N/A*
[0 - 4294967295 N/A]
View the alarm word sent via the serial communication port in hex code.
DR-92 Warning Word
Range:
Function:
0 N/A*
[0 - 4294967295 N/A]
View the warning word sent via the serial communication port in hex code.
AF-600FP /650 GP DeviceNet Operating Instructions
43
6