S (par. dn-20 cos filter 1, Par. dn-20 cos filter 1 to, D par. dn-12 process data config read – GE Industrial Solutions AF-650 GP DeviceNet User Manual
Page 43
DN-12 Process Data Config Read
Select the process read data for I/O Assembly Instances 101/151. Elements [2] and [3] of this array can be selected. Elements [0] and [1] of the array are fixed.
Option:
Function:
DN-13 Warning Parameter
Range:
Function:
0 N/A*
[0 - 65535 N/A]
View a DeviceNet-specific Warning word. One bit is assigned to every warning.
Bit:
Meaning:
0
Bus not active
1
Explicit connection timeout
2
I/O connection
3
Retry limit reached
4
Actual is not updated
5
Network off
6
I/O send error
7
Initialization error
8
No bus supply
9
Bus off
10
Error passive
11
Error warning
12
Duplicate MAC ID Error
13
RX queue overrun
14
TX queue overrun
15
Network overrun
DN-14 Net Reference
Read only from Keypad
Option:
Function:
Select the reference source in Instance 21/71 and 20/70.
[0] *
Off
Enables reference via analog/digital inputs.
[1]
On
Enables reference via the network.
DN-15 Net Control
Read only from Keypad
Option:
Function:
Select the control source in Instance 21/71 and 20-70.
[0] *
Off
Enables control via analog/digital inputs.
[1]
On
Enable control via the network.
DN-20 COS Filter 1
Range:
Function:
0 N/A*
[0 - 65535 N/A]
Sets up the filter mask for the status word. When operating in COS (Change-Of-State), it is possible to filter
out bits in the status word that should not be sent if they change.
DN-21 COS Filter 2
Range:
Function:
0 N/A*
[0 - 65535 N/A]
Sets up the filter mask for the Main Actual Value. When operating in COS (Change-Of-State), it is possible
to filter out bits in the Main actual value that should not be sent if they change.
DN-22 COS Filter 3
Range:
Function:
0 N/A*
[0 - 65535 N/A]
Sets up the filter mask for PCD 3. When operating in COS (Change-Of-State), it is possible to filter out bits
in PCD 3 that should not be sent if they change.
AF-600FP /650 GP DeviceNet Operating Instructions
42
6