GE Industrial Solutions AF-650 GP PROFINET - Manual (Page 18)

5 How to Configure the System
5.1 Configure the PROFINET Network
All PROFINET devices that are connected to the same
network must have a unique device name.
The PROFINET device name of the frequency converter can
be set via:
EN-08 Host Name
5.2 Configure the Controller
5.2.1 GSD File
In order to configure a PROFINET Controller, the configu-
ration tool needs a GSD file for each type of slave on the
network. The GSD file is a PROFINET standard text file
containing the necessary communication setup data for a
slave. Download the GSD file for the AF-6 Series drives at
www.geelectrical.com/drives. The name of the GSD file
may vary compared to this manual. Please download the
latest version from the above website.
The first step in configuration of the PROFINET Controller is
to import the GSD file in the configuration tool. The steps
outlined below show how to add a new GSD file to the
Simatic Manager software tool. For each drive series, a GSD
file is typically imported once only, following the initial
installation of the software tool.
Illustration 5.1
How to Configure the System PROFINET Operating Instruction
17
5 5