GE Industrial Solutions AF-650 GP PROFINET - Manual (Page 63)

AF-650 GP & AF-600 FP
Bit (Hex) Unit
diagnose
bit
PROFIBUS warning word
(PB-53 Profibus Warning Word)
00000001 160 Connection with DP-master is not ok
00000002 161 Unused
00000004 162 NDL (Network Data link Layer) is not
ok
00000008 163 Clear data command received
00000010 164 Actual value is not updated
00000020 165 Baudrate search
00000040 166 PROFIBUS ASIC is not transmitting
00000080 167 Initialising of PROFIBUS is not ok
00000100 152 Drive is tripped
00000200 153 Internal CAN error
00000400 154 Wrong configuration data from PLC
00000800 155 Wrong ID sent by PLC
00001000 156 Internal error occurred
00002000 157 Not configured
00004000 158 Timeout active
00008000 159 Warning 34 active
Table 10.18
AF-650 GP & AF-600 FP
Bit (Hex) Comm. option STW (DR-84 Comm. Option STW)
00000001 parameters ok
00000002 configuration ok
00000004 clearmode active
00000008 baudrate search
00000010 waiting for parameterization
00000020 waiting for configuration
00000040 in data exchange
00000080 not used
00000100 not used
00000200 not used
00000400 not used
00000800 MCL2/1 connected
00001000 MCL2/2 connected
00002000 MCL2/3 connected
00004000 data transport active
00008000 not used
Table 10.19
NOTE
DR-84 Comm. Option STW is not part of extended
diagnostics.
Troubleshooting PROFINET Operating Instruction
62
10 0