GE Industrial Solutions LP11 924 Series 6 & 10 kVA - Manual (Page 4)

modifications reserved
OPM_LPU_11U_6K0_10K_1US_V010.Doc 3 User manual LP11 924 6 & 10 kVA UPS 1.0
1 - IMPORTANT SAFETY INSTRUCTIONS
1.1 - SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and maintenance of the UPS and
batteries. It also gives all necessary information about the correct use of the UPS. Before attempting to install and start
up the UPS, carefully read this manual. Keep this manual next to the UPS for future references.
Full understanding of and compliance with the safety instructions and warnings contained in this
manual are the
ONLY CONDITIONS
to avoid any dangerous situation during installation, operation and maintenance work, and to
preserve the maximum reliability of the UPS system.
GE refuses any responsibility in case of non-observance, unauthorized alterations or improper use of the delivered UPS.
While every care has been taken to ensure the completeness and accuracy of this manual, GE accepts no responsibility
or liability for any loss or damage resulting from the use of the information contained in this document.
This document shall not be copied nor reproduced without the permission of GE.
Due to technical improvements, some of the information contained in this manual may be changed without notice.
1.2 - SAFETY WARNINGS AND SYMBOLS
Safety warnings
The text of this manual contains warnings to avoid risk to persons and to avoid damages to the UPS system and the
supplied critical loads. Do not proceed beyond these warnings if you do not fully understand and/or are not able to meet
the mentioned conditions. The non-observance of the warnings reminding hazardous situations could result in human
injury and equipment damage.
Please pay attention to the meaning of the following warnings and symbols.
WARNING
Refers to procedures or operations which, when not correctly performed, could cause personal injury or
serious damage to the system.
NOTE
Warns the user about important operations or procedures described in this manual.
Safety Symbols
CAUTION
The product may be in danger: when procedures or operations are not correctly performed, damage to
the product may be the result.
DANGER OF PARTS ELECTRICALLY LIVE
Related to all situations with potentially hazardous voltage.
DANGER OF CRUSHING
Used when moving the equipment due to the heavy weight.