GE Industrial Solutions LP11 924 Series 6 & 10 kVA - Manual (Page 5)

modifications reserved
OPM_LPU_11U_6K0_10K_1US_V010.Doc 4 User manual LP11 924 6 & 10 kVA UPS 1.0
1.3 - GENERAL
DANGER!
RISK OF ELECTRIC SHOCK.
Some of the parts of the UPS are necessarily under a hazardous voltage
Do not remove the cover; there are no user serviceable parts inside.
There may be danger, loss of life or personal injury if warnings are not strictly observed
CAUTION
There may be damage to the equipment if procedures and practices are not strictly observed and
followed.
NOTE
Do not attempt to service the UPS unless you have had proper training. Refer all maintenance and
servicing to properly qualified, skilled and competent service personnel.
Qualified, skilled personnel are persons who (because of their training, experience, and position as well as their
knowledge of appropriate standards, regulations, health and safety requirements and working conditions) are authorised
to be responsible for the safety of the equipment, at all times whilst carrying out their normal duties and are therefore
aware of, and can report, possible hazards (observe IEC 364, DIN VDE 0105 and national wiring regulations and accident
prevention rules).
1.4 - INTENDED USE
LP11 924 Series UPS are designed to power up emergency lighting equipment and protect form all forms of power
interference, including complete power failure.
CAUTION
DO NOT plug household appliances such as electric heaters, toasters or vacuum cleaners into the UPS.
The technical data as well as information concerning connecting requirements can be found on the rating label and in
this document and shall be strictly observed.