Franklin Fueling Systems TS-LS300 AutoLearn Pressure-Based Electronic Line Leak Detector System Users Guide - Manual (Page 26)

3 Page 3-8 ELECTRICAL INSTALLATION & WIRING
LS300 User’s Guide
Enclosure
Nut
Lock Washer
Earth Ground Conductor
Cup Washer
Stud: #8 threaded post
Figure 3-5
Ground Stud
9.) Ground Stud: The installer is to connect the Earth Ground Conductor to the most convenient
ground terminal as long as it meets local and national codes. If the ground stud is to be used
the installer shall follow the proper stacking configuration shown in figure 3-5. The earth
ground conductor must be 12 AWG or larger.