Franklin Fueling Systems TS-LS300 AutoLearn Pressure-Based Electronic Line Leak Detector System Users Guide User Manual
Page 8
PREFACE
Page
P-5
P
LS300 User’s Guide
Site Survey & Assessment
A precision line test must be conducted before installing the LSU300 transducer for
the first time and before replacing any line leak detector that is indicating a leak to
assure line integrity .
Before installation of Auto-Learn system verify that the equipment is proper for the
site.
Check that the pipeline volume (based on length, internal diameter, and pipe type)
is less than the 3rd party approval (see Table P-2). Third party tests have approved
Figure P-1 Auto-Learn System Applications (5) – Block Diagram
LLD
RS485
Inputs (#1-4):
Lines (#)
Power
Hooks (#)
Power
Hooks (#)
Inputs (#1-4):
Lines (#)
Inputs (#1-4):
4
TS-ATG
Console
5
TPC TPC TPC
LLD
RS485
LLD
RS485
TS-LS300
Auto-Learn
Console #1
WITH
TS-TPI
PCB
TS-TPI
PCB
TS-ATG
Console
1
TS-LS300
Auto-Learn
Console
TS-ATG
Console
3
TS-LS300
Auto-Learn
Console
LLD
RS485
TPC TPC
TS-LS300
Auto-Learn
Console #1
TS-TPI
PCB
Inputs (#1-4):
Lines (#)
Hooks (#)
Power
2
TS-ATG
Console
Lines (#)
TPC
TPC TPC
TPC TPC
TS-LS300
Auto-Learn
Console #2
Inputs (#5-8):
Hooks (#)
Lines (#)
Power
Hooks (#)
Power
TS-LS300
Auto-Learn
Console #2
TPC TPC
Hooks (#)
Lines (#)
Power
Inputs (#5-8):
TS-TPI
PCB
TS-LS300
Auto-Learn
Console
Inputs (#1-4):
Lines (#)
Power
Hooks (#)