AUMA Electric multi-turn actuators SA 07.1 - 16.1_SAR 07.1 - 16.1 MATIC AM 01.1 - 02.1 - Manual (Page 17)

8.1 Connection with AUMA plug/ socket connector (S, SH, SE)
Before mains connection
Check whether type of current, supply voltage, and frequency comply with
motor data (refer to name plate at motor):
Opening the terminal compartment
.
Loosen bolts (1) and remove cover (figure G).
.
Loosen screws (2) and remove socket carrier from cover.
.
Insert cable glands suitable for connecting cables
(The enclosure protection stated on the name plate is only ensured if suitable
cable glands are used.).
.
Seal cable entries which are not used with suitable plugs.
Multi-turn actuators SA 07.1 – SA 30.1/ SAR 07.1 – SAR 30.1
Operation instructions with actuator controls AUMA MATIC AM 01.1 / AM 02.1
17
VD00 63-4/45
Art. No.: Z006.413
3 ~ 480V
60Hz
0.09 kW
Y 0.60A
Current type/mains voltage/mains frequency
NEMA 4X
Thermal protection: Th
Insulation class: F
Enclosure protection
Figure F-1: Version SH (standard) Figure F-2: Version S Figure F-3: Version SE
Figure G: Opening the terminal compartment
Cover
(1)
Socket carrier
(2)
Cable gland and
screw plug
in enclosure protection
according to name plate