AUMA Electric multi-turn actuators SA 07.1 - 16.1_SAR 07.1 - 16.1 MATIC AM 01.1 - 02.1 User Manual
Page 3
3
Multi-turn actuators SA 07.1 – SA 30.1/ SAR 07.1 – SAR 30.1
Operation instructions
with actuator controls AUMA MATIC AM 01.1 / AM 02.1
Page
17.
Setting the electronic position transmitter RWG (option)
30
17.1
Setting 2-wire system 4 – 20 mA and 3- /4-wire system 0 – 20 mA
31
17.2
Setting 3- / 4- wire system 4 – 20 mA
32
18.
Setting the mechanical position indicator (option)
33
19.
Closing the switch compartment
33
20.
Actuator controls AUMA MATIC
34
20.1
Functions of the diagnosis LEDs on the interface board (standard version)
34
20.2
Programming the logic board
35
20.3
EMERGENCY - OPEN and EMERGENCY - CLOSE signal (option)
36
21.
Electronic positioner (option)
37
21.1
Technical data
37
21.2
Setting
37
21.2.1
Setting type of signal
39
21.2.2
Setting actuator behavior on loss of signal
40
21.3
Positioner adjustment for end position CLOSED (standard version)
41
21.4
Positioner adjustment for end position OPEN (standard version)
43
21.5
Setting the sensitivity
43
21.6
Positioner adjustment for end position OPEN (inverse operation)
45
21.7
Positioner adjustment end position CLOSED (inverse operation)
46
21.8
Positioner in Split Range version (option)
47
21.8.1
Split Range: description of functions
47
21.8.2
Programming
47
21.8.3
Positioner adjustment for Split Range
47
22.
Timer (option)
49
22.1
Functions of the diagnosis LEDs (timer)
49
22.2
Setting start and end of stepping mode via DUO limit switching (option)
50
22.3
Setting ON and OFF times
51
23.
Fuses
52
23.1
Fuses within the actuator controls
52
23.2
Motor protection
54
24.
Enclosure protection IP 68 (option)
55
25.
Maintenance
56
26.
Lubrication
56
27.
Disposal and recycling
56
28.
Service
57
29.
Spare parts list Multi-turn actuator SA(R) 07.1 – SA(R) 16.1
60
30.
Spare parts list controls AUMA MATIC
62
Index
63
Addresses of AUMA offices and representatives
64