Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setup Manual - Manual (Page 22)

Micro-PWC
™ Installation & Setup Guide
12 Requirements
2.3 Micro-DCI Instrument Compatibility
In order to use Release 4.0 of the 53SU6000 Micro-DCI Communication Services system software, the fol-
lowing changes or upgrades must be made to any Micro-DCI instruments to be used with the new soft-
ware:
• Supervisor cards require an upgrade to REV5 of the firmware
• 53MC5000 units with firmware levels of REV0 through REV4 generate pre-acknowledged
alarms. REV5 firmware is available that enables alarms to be acknowledged by the operator.
• 53SL6000 units with REV0 firmware generate pre-acknowledged alarms. REV1 firmware is
available that enables alarms to be acknowledged by the operator.
• The following control modules can only be used in Hierarchical Displays by connecting them to
CON modules on the Supervisor Card:
53MC1000
53MC2000
53MC4000
50KM2000