Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setup Manual - Manual (Page 60)

Micro-PWC
™ Installation & Setup Guide
50 Start-up and Operation
4.7.2 ATOMS
4.7.2.1 Types of ATOMnames
There are two types of ATOMnames:
4.8 Other Considerations
The UdciGDS.ini file (located in the Windows root directory) allows several parameters of the Micro-
PWC system to be customized:
SYMBOLIC
ATOMNAMES: Symbolic ATOMnames are short abbreviations for the name of the
value; for example, PV for Process Variable,etc. Available
ATOMnames are listed in the "Micro-DCI Instrument ATOM
Reference" portion of the Micro-DCI on-line Help.
NETWORK
ATOMNAMES: Network ATOMnames (called "Network Reference" in the
53SL6000 Instruction Bulletin) have the form L00, C101, etc.
[Events]
Area This parameter should be set to the area in which all Micro-DCI
events will be reported.
Values range from 1 to 64.
Priority This parameter should be set to the priority level at which all
Micro-DCI events will be reported.
Values range from 1 to 16.
[Timing]
AtomStaleSec The Micro-PWC system's Micro-DCI instrument interface
provides values to the various Micro-PWC system displays.
This parameter establishes an upper limit as to how old trend
data values may be. Setting this parameter to low time values
produces fresher data but increases the time required to call up
a display for the first time. Settings are in seconds. Values
range from 1 to 65535 seconds.
BkgdDelayMSec This parameter is set by the factory and should not be
changed.