1 micro-pwc mode installation, 1 pre-setup procedure, 3 beginning micro-pwc installation – Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setup Manual User Manual
Page 42
Micro-PWC
™ Installation & Setup Guide
32 Installation
Micro-PWC Client Mode - When this mode is selected, the system provides operator displays, but does
not perform network tasks such as database and graphics storage and communication with other con-
soles. These tasks are performed by a separate node which then provides the information to the client
nodes which it serves. The server node must be operational prior to the startup of Client systems. A "cli-
ent" license is required to use this mode.
If you are installing the Micro-PWC software in the Micro-PWC mode, go to
, and begin the installation process. If you are installing the Micro-PWC software in the
Micro-PWC Client mode, go to
and begin the installation process.
3.5.1 Micro-PWC Mode Installation
3.5.1.1 Pre-Setup Procedure
•
Check that the Micro-PWC hardware key is connected to the parallel port of the computer.
•
Have the license key(s) ready.
•
Have the Micro-DCI Supervisor board I/O port address(es) ready.
•
Power on the base PC and boot the Windows operating system software.
•
Log on to the Windows software with administrative privileges. You must have administrative
privileges or the installations process will not complete successfully.
•
Close all Windows applications that are open, (such as Microsoft Word, Excel, Mail,
Scheduler, etc.).
3.5.1.2 Beginning Micro-DCI Master Setup for Full Micro-PWC Operation
1.
Insert the Micro-DCI CD into the CD-ROM drive.
2.
Open Windows Explorer and select the drive letter of the CD-ROM drive.
3.
In the root directory of the CD-ROM, double click on the setup.exe file.
4.
In the Micro-DCI Master Setup, click on the Install Micro-PWC button.
3.5.1.3 Beginning Micro-PWC Installation
•
The InstallShield Wizard is loaded and then the Micro-PWC System Setup window appears.
Table 3-1. License Type and Operational Mode Interaction
LICENSE TYPE
OPERATIONAL MODES ENABLED
Micro-PWC
Micro-PWC Client
srvr
X
X
client
X
✎ NOTE
Micro-PWC Setup is the main installation program. Several sub-
windows will open and close throughout the installation process.
The installation will be complete when the main Micro-PWC Setup
program ends. Do not reboot the base PC until the main Micro-
PWC Setup prompts you to do so.
✎ NOTE
For Micro-PWC client installation, skip to