2 micro-pwc client installation mode, 1 pre-setup procedure, 2 beginning micro-dci master setup – Micromod Micro-PWC: 53PW6000 MicroPWC Installation and Setup Manual User Manual
Page 46: 3 beginning micro-pwc installation, 4 micro-pwc setup, Section 3.5.2
Micro-PWC
™ Installation & Setup Guide
36 Installation
•
At this point the Notepad application opens and a Micro-PWC Read Me file appears,
containing Micro-PWC release information. When you have finished reading this document,
close Notepad.
•
Setup will now ask if you want to restart the PC.
•
Select Yes and then click the Ok button to restart the PC.
•
This completes the setup process. Proceed to
3.5.2 Micro-PWC Client Installation Mode
3.5.2.1 Pre-Setup Procedure
•
Check that the Micro-PWC hardware key is connected to the computer.
•
Have the client license key(s) ready.
•
Power on the base PC and boot the Windows operating system software.
•
Log on to the Windows software with administrative privileges. You must have administrative
privileges or the installations process will not complete successfully.
•
Close all Windows applications that are open, (such as Microsoft Word, Excel, Mail,
Scheduler, etc.).
3.5.2.2 Beginning Micro-DCI Master Setup
•
Insert the Micro-DCI CD into the CD-ROM drive.
•
Open Windows Explorer and select the drive letter of the CD-ROM drive.
•
In the root directory of the CD-ROM, double click on the setup.exe file.
•
In the Micro-DCI Master Setup window, click on the Install Micro-PWC button.
3.5.2.3 Beginning Micro-PWC Installation
•
The InstallShield Wizard is loaded and then the Micro-PWC System Setup window appears.
Make sure all other Windows programs are closed on this PC.
•
Click Next to begin installing the Micro-PWC system.
3.5.2.4 Micro-PWC Setup
•
The Install Micro-PWC window appears and asks whether or not to install the Micro-PWC
portion of the Micro-PWC product now. The Setup program just scanned your system for any
existing versions of Micro-PWC and informed you of the results of this scan through the text in
this window. The following instructions assume that a previous version was not found. If a
previous version was found, simply follow the instructions in the Setup program.
•
Select Install Micro-PWC now to begin installing Micro-PWC on your base PC.
•
Click the Next button.
•
An informational dialog box appears advising you that the Micro-PWC installation will launch in
✎ NOTE
Micro-PWC Setup is the main installation program. Several sub-
windows will open and close throughout the installation process.
The installation will be complete when the main Micro-PWC Setup
program ends. Do not reboot the base PC until the main Micro-
PWC Setup prompts you to do so.