Multichannel Systems Cardio2D Manual - Manual (Page 105)

Cardio 2D+ Analyzer Software
101
Click "2D" tab in Analyzer Settings.
The setting for the "Propagation Path" is from minimum to maximum by default. If you like
to define a propagation path manually, for example, when propagation is not linear but circular,
please select the option "Manual Path". This option enables the option "Set Propagation Path"
in the color map.
Latency / Velocity
Select "Latency" from the drop down menu.
The diagram shows the latency (ms) of the excitation in dependency of the time (ms) between
the minimum and the maximum color coded in overlay for each recording separately.