Multichannel Systems Cardio2D Manual - Manual (Page 98)

Cardio2D Manual
94
The "ROI Selection" tabbed page lists the single recording sequences from one electrode. Select
the electrode in the "Channel control" field of the "Control Window". Via ROI you can discard
one part or several parts of the recording sequence which are now excluded from the analysis.
Additionally it is possible to discard a complete recording sequence by deselecting the respective
check box. The data in the ROI will not be included in the analysis.
To set a "Region of Interest ROI", please click with the mouse into the desired recording sequence
and draw a red box by keeping the left mouse button pressed. To change the breadth of a ROI,
use the red buttons on the left and on the right side, to replace a complete ROI, click into the red
field and move it with the mouse.
To delete the ROI, click with the right mouse button into the red box The command
"Remove Marker" will appear. Or click onto the ROI to select it and press the delete key.
Select an value in μV from the drop down box to scale the axes of all recording sequences.
Use the buttons for zooming in and resetting the axes for each recording phase separately.