Multichannel Systems Cardio2D Manual - Manual (Page 82)

Cardio2D Manual
78
Click "HB Average" tab in "Analyze" dialog.
If the heartbeat average feature is welcome, please enable the check box "On". If you do not use
this feature, do not enable the check box to save computer performance.
Select the "Recording" for the heartbeat average from the drop down menu. Define the time
interval before a heartbeat "Pre HB Interval" and the interval after a heartbeat "Post HB Interval"
from the up down boxes. During these time spans, no additional heartbeat should be detected.
Make sure to keep these intervals shorter than the shortest heartbeat to heartbeat interval.
Click the button "Apply to all Recordings" and the settings are applied to all available recordings
phases. Otherwise you can define different settings for each single recording phase.
If different values for different recordings are set, this will be indicated by the orange background
color of the drop down box. Please see the next picture.