Multichannel Systems Cardio2D Manual - Manual (Page 33)

Cardio 2D Software
29
4.6 Compound / Basic
Compound
Click "Compound" in main menu "Experiment".
The "Basic" icon is replaced by the "Compound" icon.
Click the "Compound" icon . The "Compound Settings" dialog appears.
In this dialog you can choose series of compounds which are applied to the cardiac cells or tissue
on the MEA. In parallel to the "Basic Settings" dialog the options referring to the recording
phases are available. Please see above. There are two series of compounds provided: The dilution
factor in "Series 1:10" is ten, and in "Series 1:3" the factor three. But you can create a user
defined compound series by overwriting the given example in the window. Please consider the
syntax, otherwise you get a syntax error message.
The functionality of the settings in the "Switch Recording" drop down menu is the same as in the
"Basic" settings. Define the duration o f the test phase in the "Test Duration" drop down menu.
Enable the check box "Record Apply Phase" if you want to save all data inclusive the data of the
apply phase in the recording file.