Multichannel Systems Cardio2D Manual - Manual (Page 90)

Cardio2D Manual
86
Click "Edit Plot" icon . A plot menu appears.
With the help of the plot menu it is possible to modify a lot of plot parameters. For example,
you can adapt the figure to a special layout wanted for a special publication. Please see also
chapter "General Software Features".
The two red bars in the heartbeat plot of the single channel view represent the region of
interest ROI. Click on the middle of one red bar near to the zero line. The mouse pointer will
turn into an arrow with two arrowheads. Keep the mouse button pressed. Now you are able to
vary the breadth of the ROI. The displays in the MEA electrodes window, and in the overlay plot
window are adapted immediately. Additional you can click anywhere on one of the red bars, and
the mouse pointer will turn into a cross with four arrowheads. Keep the mouse button pressed.
Now you can move the ROI with constant breadth to any region you want to analyze closer.
Again the displays in the MEA electrodes window, and in the overlay plot window are adapted
immediately.
Click with the right mouse button on one of the red bars. The "Edit" menu appears.