Multichannel Systems Cardio2D Manual - Manual (Page 45)

Cardio 2D Software
41
Modulation of the provided Stimulation Patterns
Initially the provided stimulation patterns are default. To adjust a primitive to your requirements,
please click onto the icon, which will be highlighted in pale blue. In the upper part of the dialog
the setting parameters for this pattern appears on the left and a picture of the actual shape of
the pattern on the right. Immediately after changing a pattern, the modulation is visible in the
“Single Pattern” view and in the “Complete Stimulus Pattern” view. Save the stimulus pattern
as default by clicking the "Save Primitive as Default" icon beside the "Marker" check box.
Most of the parameters have to be adjusted with up-down boxes. Please click into the up-down
box and move the wheel of your mouse for quick adjustments in wide steps. Use the arrows for
fine tuning. The modulation is immediately displayed in the single pattern and in the complete
pattern window. Overwrite the letter in the up-down box, the modulation will be displayed after
confirming the value with “Enter” or after clicking into another box. Playing with the different
possibilities for adjustment allows to create each shape of pulse which could be necessary.
Additionally it is possible to modulate the shape, when repeating pulses in relationship
to each other.
Stimulus Pattern: Flat Line
The first provided primitive is a flat line stimulus. To adjust the duration, please use the respective
up-down boxes: Hour, minute, second, millisecond and microsecond. Define the value of the
pattern in the "Amplitude (mV)" up-down box.