Multichannel Systems Cardio2D Manual - Manual (Page 94)

Cardio2D Manual
90
Click the "Map Settings" icon . The dialog "Map Settings" appears. Click "Map" tab.
In this dialog you have to define the settings for the color map.
Color Map: The usual used color map for cardiac issues is the "Jet Invers" map, but you can also
choose "Hot, Cool or Grey" maps. To remove the colors from the map, click "Off". The isochrones
will remain only.
Contour: The drop down menu is for changing the color of the contour for the isochrones into
"Black, Jet, Hot, Cool and Grey". Or you can remove the lines with "Off". Adjust the number of
the contour lines from the numeric box beside; up to 100 contour lines are possible.
Arrows: The feature is not yet implemented in this version of Cardio2D+. As soon as it will be
implemented, you find a Read Me on the MCS web site, where you will be able to download the
new version of Cardio2D+.
Minimum / Maximum: You have to define the minimum and the maximum of the scale of the
color map. That means, you define the time frame in which the excitation pattern are displayed in
the color map. Usually you start with zero in the minimum, that is the pacemaker. The excitation
pattern will run from the pacemaker over the map to the maximum. The widest selectable time
frame for the color map spans from 0 μs in the minimum to 10000 ms in the maximum. To change
the colors of the map, please use the first drop down menu "Color Map".