Multichannel Systems Cardio2D Manual - Manual (Page 75)

Cardio 2D+ Analyzer Software
71
Select "ROI Selection" tab. Please see the picture below.
This tabbed page lists the single recording sequences from one electrode. Select the electrode
in the "Channel control" field of the "Control Window". Via ROI you can discard one part or
several parts of the recording sequence which are now excluded from the analysis. Additionally
it is possible to discard a complete recording sequence by deselecting the respective check box.
The data in the ROI will not be included in the analysis.
Select "Heartbeat" tab. Please see the picture below.
The single channel view on top of the tab page shows amplitude and rate of the heartbeats
of one recording phase.
The MEA electrode window corresponds directly with the color map. The field potential of that
single electrode is shown in MEA electrode window which is selected via mouse in the color map.
Select a plot of "Latency" or a plot of "Velocity" from the drop down menu in the Latency
window.