Multichannel Systems Cardio2D Manual - Manual (Page 48)

Cardio2D Manual
44
Stimulus Pattern: Ramp
Modulate the amplitude "Amplitude (mV)" and the duration "Duration (μs)” of the ramp pulse
via up-down boxes. To adjust the steepness of the arms of the pulse, please use the three up-
down boxes for the ascending part, the plateau and the descend arm independent from each
other. Setting the number of cycles to more than one enables the inter stimulus interval "ISI (μs)"
up-down box. Additionally the “Arrow” button will be enabled.
When using more than one cycle you can click onto the arrow symbol for additional options:
A highlighted parameter field appears to modulate the amplitude and the duration of the ramp
pulse in relationship to each other. The window "Single Pattern" shows the ramp pulse in an
overlay plot. The lower window "Complete Stimulation Pattern" shows the combined sequence
of all stimulus pulses.