Multichannel Systems Cardio2D Manual - Manual (Page 87)

Cardio 2D+ Analyzer Software
83
Recording Control of Cardio2D+
In the recording control window the name(s) of the currently analyzed Cardio2D raw data and / or
result file is displayed. Additional the information about the recordings saved in this experiment
are listed in a table. To select one recording phase to be analyzed, please click onto the desired
row, which will be highlighted in dark blue and displayed in the single channel view of the MEA
window. To view raw data and results of a recording phase in the MEA window, please click onto
the desired row in the table. The currently selected recording phase will be highlighted in dark
blue.
The table has five columns: the "ID" of the recording phase, the "Type" of the phase, was it an
apply "A" or a test phase "T". The "Dose" of the recording phase with its unit, the "Compound"
and the "Duration".
Channel control of Cardio2D+
The channel control window is similar build to the heartbeat window in Cardio2D, but the
function is different. It also shows the MEA electrodes in the electrode grid. You can zoom
to any electrode by clicking on the icon "Show Channel Data" , and on the electrode.
The zoomed electrode is displayed in the larger single channel view.