Agilent Technologies N5183A MXG - Manual (Page 12)

2 Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide
Getting Started with Remote Operation
Programming and Software/Hardware Layers
Programming and Software/Hardware Layers
Agilent MXG, ESG, PSG, and E8663B signal generators support the following
interfaces:
Use these interfaces, in combination with IO libraries and programming languages, to remotely
control a signal generator.
Figure 1- 1 uses GPIB as an example of the relationships between the
interface, IO libraries, programming language, and signal generator.
Instrument Interfaces Supported
Agilent MXG GPIB, LAN, and USB 2.0
Agilent E8663B a
a.The PSG and E8663B’s AUXILIARY INTERFACE connector is compatible with ANSI/EIA232
(RS-232) serial connection but GPIB and LAN are recommended for making faster measurements
and when downloading files. Refer to
“Using RS-232 (ESG, PSG, and E8663B Only)” on page 45
and the User’s Guide.
GPIB, LAN , and ANSI/EIA232 (RS- 232) serial
connection
Agilent ESG GPIB, LAN, and ANSI/EIA232 (RS- 232) serial
connection
Agilent PSG
a GPIB, LAN, and ANSI/EIA232 (RS- 232) serial
connection