Agilent Technologies N5183A MXG - Manual (Page 167)

Agilent N518xA, E8663B, E44x8C, and E82x7D Signal Generators Programming Guide 157
Programming the Status Register System
Status Groups
Standard Event Status Group
The Standard Event Status Group is used to determine the specific event that set bit 5 in the Status
Byte Register. This group consists of the
Standard Event Status Register (an event register) and the
Standard Event Status Enable Register .
This is the named
status register for
the E4438C.
However, not all
signal generator
models use all of
the shown events
(i.e. some use only
a subset of the
E4438C’s status
registers).