Fairbanks H90-5200-A Digital Instrument User Manual
Page 36
SECTION 3:
INSTALLATION
A. Instrument Mounting Options
The H90-5200-A instrument is designed for bench mounting, wall mounting, or pillar
mounting. Wall mounting plates are provided with each instrument.
1. Wall Mount
a. Remove the four feet from the bottom of the instrument.
b. Rotate the wall mounting plates 180 degrees, so they extend out to the sides
of the instrument.
c. Reinstall the foot screws through the mounting plates, into the bottom of the
instrument and tighten.
d. Mount the instrument on the wall with fasteners through the mounting plates
into the wall. It is recommended that the water proof glands face downward
when the instrument is wall mounted.
e. Place the instrument front panel in the appropriate position, rotated 180
degrees from the normal bench mounting position.
2.
Pillar Mount
The instrument can be mounted on a pillar attached to the platform. See Appendix VIII
for more information.
50515
36
Issue #2 4/04