Fairbanks H90-5200-A Digital Instrument - Manual (Page 9)

D. Indicator Description
lb, kg : Indicates the units of the displayed weight. If neither indicator is lighted, then
“Custom Units” is enabled.
NET: Indicates the instrument is displaying NET weight.
TARE: Indicates the instrument is displaying TARE weight.
ID: Indicates the instrument is displaying a product ID or date in international date
(day/month/year) format.
ENABLE: Indicates the setpoint outputs are active
SP1, SP2, SP3, SP4: Indicates the particular setpoint output is ON when the SP
Enabled indicator is also ON.
C = Center-of-Zero: A “C” will appear in the left most digit to indicate that the weight is
within a quarter grad of zero.
E. Back Panel Description
1. Serial Output Port
2. Accessory Port
3. AC Power cord, water tight gland.
4. Load Cell, water tight gland.
5. Setpoint output, water tight gland.
F. Basic Weighing Operations
1. General Gross Weighing
a. Push GROSS/NET to select Gross. When the instrument is in Gross Mode,
the NET Indicator light will be OFF.
50515 9 Issue #2 4/04
2417
5 3 2 1 4