Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 2)

Cut to Length with Multi Stroke Program
Cut to Length with Multi Stroke Program
The standard multi-stroke program is a multiple feed length program within a
specified job number. The different programmed feed lengths will be referred
to as sequences. Each sequence can be repeated many times with 0 being
entered for no repeats. Although this is the standard program, Rapid Air can
program other configurations in any combination to meet the customer’s
requirements.
The standard multi-stroke program has 10 jobs with 10 programmable
sequences per job. Each sequence can be a different feed length which can
be repeated multiple times. The following chart depicts the previous write-up.
GAG FEED
TOTAL JOBS 10
TOTAL SEQUENCES 10
TOTAL REPEATS 10
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (1 of 66) [12/10/2001 3:44:57 PM]