Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 45)

Cut to Length with Multi Stroke Program
Pressing the F4 key once will restart the program to the jog mode screen so
that jog is now active. Pressing the F4 key twice will reset the program to the
manual mode screen. If the F4 key was pressed twice then the following
screen is displayed.
MANUAL MODE F1=INCH
F2=SINGLE FEED MODE
F4=EXIT MANUAL MODE
CYCLE ROLL WITH KEYS
F2-SINGLE FEED
Pressing the F4 key once will reset the program to the jog mode screen so
that jog is now active. Pressing the F4 key twice will reset the program to the
manual mode screen. If the F4 key was pressed twice then the following
screen is displayed.
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (44 of 66) [12/10/2001 3:44:58 PM]