Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 42)

Cut to Length with Multi Stroke Program
FEED PARAMETER OUT
OF RANGE. THE LENGTH
IS TOO LONG FOR FEED
ARC OR SPM F4=REPEAT
F4=Repeat this command returns to the previous screen so that the new
parameters can be entered.
Pressing the F4 key at any time returns you to the main menu.
MAIN MENU
F1=JOB # F2=MANUAL
F3=AUTOMATIC CYCLE
F4=REVIEW JOB PROGRAM
SELECT F2=MANUAL
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (41 of 66) [12/10/2001 3:44:58 PM]