Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 53)

Cut to Length with Multi Stroke Program
JOB NUMB=00 ENTER IN
THE SEQ=00 THEN
PRESS F4 TO CONTINUE
Pressing the F4 key will display the following screen.
JOB#=00 SEQUENCE#=00
FL=000.000 REPEAT=00
SPEED=000 ACCEL=000
F4=EXIT TO MAIN MENU
The above screen displays the job number and the sequence that was
selected. If all that was needed was to look at the sequence to verify that it
was correct then pressing the F4 key will return you to the main menu. If
there was a problem with this particular
sequence, like a length change, then the length could be adjusted now and
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (52 of 66) [12/10/2001 3:44:58 PM]