Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE - Manual (Page 50)

Cut to Length with Multi Stroke Program
then pressing the F3 key will display the following screen.
START AUTOMATIC FROM
F1=SEQUENCE NUMBER 1
F2=PREVIOUS SEQUENCE
AND REPEATS POSITION
After selecting one of the above choices the following screen appears.
SELECT CONTINUOUS OR
BATCH CYCLE F1=BATCH
F2=CONTINUOUS CYCLE
F4=EXIT TO MAIN MENU
F1=BATCH
If the F1 key was pressed then the servo will be in the auto batch mode and
the following screen appears.
BATCH SETTING=000000
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (49 of 66) [12/10/2001 3:44:58 PM]