Rapid-Air CUT-TO-LENGTH WITH MULTI-STROKE User Manual
Page 39
Cut to Length with Multi Stroke Program
The first screen to be displayed on the operator terminal will look like this:
RAPID-AIR CORPORATION
4601 KISHWAUKEE STREET
ROCKFORD, IL 61109
815-397-2578
After a few seconds, the display will clear and the following display will
appear:
MAIN MENU
F1=JOB F2=MANUAL
F3=AUTOMATIC CYCLE
F4=REVIEW JOB PROGRAM
SELECT F1=JOB #
The first step in programming the servo feed is to select a job number which
will be used to store the parameters the operator inputs or recall the
parameters which have been previously loaded into the servo controller
program. When the operator selects F1 on the keypad, the screen will change
to:
JOB SELECTION MENU
file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (38 of 66) [12/10/2001 3:44:58 PM]