Mediabridge MWN-WAPR150N User Guide - Manual (Page 16)

MWN-WAPR150N Wireless Router v11.8
16
to your computer’s network port. Plug the
other end into one of the Medialink Router’s
YELLOW ports numbered 1, 2, 3, or 4.
(It is not required to connect a computer to
the router at this point. But it is highly
recommended for faster setup of your
wireless network. Once setup is complete,
you may then unplug the computer and
connect wirelessly.)
(Figure 2.1)
5. Power On your Cable Modem.
a. Plug in the power cord for your modem.
Reinstall the batteries (if applicable).
b. Wait for the modem to fully restart (the
modem is fully restarted when the lights
have been blinking or solid in a steady
pattern for at least 30 seconds).