Mediabridge MWN-WAPR150N User Guide - Manual (Page 94)

MWN-WAPR150N Wireless Router v11.8
94
Chapter 9 Traffic Control
9.1 Traffic Control
Traffic control is used to limit communication speed in the
LAN and WAN. Up to 20 entries can be supported with the
capability for at most 254 PCs' speed control, including IP
address range configuration.
 Enable Traffic Control: To enable or disable the
internal IP bandwidth control. The default is disabled.
 Interface: To limit the uploading and downloading
bandwidth in WAN port.
 Service: To select the controlled service type, such as
HTTP service.
 IP Starting Address: The first IP address for traffic