Mediabridge MWN-WAPR150N User Guide - Manual (Page 18)

MWN-WAPR150N Wireless Router v11.8
18
confirm that you are able to access the
internet. If so, proceed to Step 10
Configuring Your Wireless Network.
b. If your computer is wireless (not wired to the
router), you will need to manually connect to
the wireless network that begins with
“Medialink”. (Open the available wireless
networks, click on the network name that
begins with “Medialink”, Then Click
Connect).
*Important Note: If your computer is
requesting a “PIN” – DO NOT ENTER THE PIN
(unless you are experienced with and intend
to enable WPS on all your wireless devices).
Instead, click the option “I don’t want to
configure this network I just want to
connect”.
Confirm access to the internet. If you are
able to connect to the internet, proceed to
Step 10 Configuring Your Wireless Network.
(for more details on how to connect to a
wireless network see Section 2.4 on page
52)