Mediabridge MWN-WAPR150N User Guide - Manual (Page 44)

MWN-WAPR150N Wireless Router v11.8
44
5. If you are able to log in to the router settings page,
you will see the “Welcome to Setup Wizard” screen.
6. Click Next on the Setup Wizard.
7. Select “ADSL Virtual Dial-up via PPPoE” and click
Next.
8. When prompted, enter your DSL username (typically
the primary email address on the DSL account) and
password (provided by your ISP), click Next.
9. The router will display the System Status Screen.
The Network Status Connection Status will change
from “Disconnect” to “Connecting” and then to
“Connected”. At this point, you should have internet
and you may proceed to Step 10 to configure your
wireless network.
a. If you do not have internet, check with your
ISP to be sure that your modem does require
your router to have the User Name and
Password and that the info you entered is
correct. If the User Name and Password are
correct, contact Technical Support for further
assistance-
[email protected] or call
856-216-8222 (Tuesday to Saturday
9am-6pm EST.