Mediabridge MWN-WAPR150N User Guide - Manual (Page 82)

MWN-WAPR150N Wireless Router v11.8
82
 PBC ：Select the PBC or press the WLAN/WPS button on
the back of the device for about one second and the WPS
indicator will be blinking for 2 minutes. While the light is
blinking, you can enable another device to implement
the WPS/PBC negotiation between them by pressing the
device’s WPS button. Two minutes later, the WPS
indicator will be off, which means the WPS connection is
completed. If more clients are added, repeat the above
steps. At present, the WPS supports up to 32 clients
access.)
 PIN ：If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the same
code in the WPS client.
 WPS Summary ： Shows the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
 WPS Current Status ：Idle means WPS in idle state.
Start MSC process means the process has been started
and is waiting to be connected. Configured means the
negotiation is successful between server and clients.
 WPS Configured ：“Yes” means WPS feature is enabled
and active. “No” means it is not active. If a passphrase
or key is used with normal security settings, then “No”
will display here.
 WPS SSID ：Show the main SSID set by WPS.
 WPS Auth. Mode ：The authorization mode deployed
by WPS, generally WPA/WPA2-personal mode.