Mediabridge MWN-WAPR150N User Guide - Manual (Page 67)

MWN-WAPR150N Wireless Router v11.8
67
Chapter 5 Advanced Settings
5.1 Firewall
In this section you can disable the Firewall or NAT of the
router. The Firewall and NAT are enabled by default when
connecting an internet source to the WAN port of the
Medialink router.
WARNING: Disabling the Firewall or NAT of the router can
pose security risks. Please be sure you have local Firewalls in
place on your connecting devices if you disable these
functions within the Medialink router.
5.2 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN
ports.