Mediabridge MWN-WAPR150N User Guide - Manual (Page 51)

MWN-WAPR150N Wireless Router v11.8
51
8. Setup security for your wireless network: Click Wireless
Settings, then click Wireless Security Settings. (For
help in choosing your security type see the
“Help_WirelessNetworkSecurity.pdf” or
“Help_WEP_WPA_WPA2.pdf” document located in the
User Guide folder on the CD.)
9. Disable the DHCP Server by clicking DHCP Server,
uncheck Enable, click Apply.
10. Power down the Medialink router, and your original
router by unplugging the power cord from the power
outlet
11. Connect an Ethernet cable from the Original Router to
any of the YELLOW LAN ports (Not the Blue WAN port)
of the Medialink router. (At this point the Medialink router
will have 2 x yellow ports occupied – one to the computer
and one to the original router)
12. Power up the Original Router, wait 30 seconds for it to
fully restart, Power up the Medialink Router, wait 30
seconds for it to fully restart.
13. Test the internet connection through the computer that is