Mediabridge MWN-WAPR150N User Guide - Manual (Page 31)

MWN-WAPR150N Wireless Router v11.8
31
NOT press the reset button on your modem as it will
remove all your settings.)
13. Re-Connect your Network Cable(s)
a. Plug a network cable from your DSL modem
into your Medialink Router’s BLUE WAN Port.
(DO NOT connect the included AC/DC
Adapter to the router’s Power port at this
time.)
b. Using another network cable, plug one end
to your computer’s network port. Plug the
other end into one of the Medialink Router’s
YELLOW ports numbered 1, 2, 3, or 4.
(It is not required to connect a computer to
the router at this point. But it is highly
recommended for faster setup of your
wireless network. Once setup is complete,
you may then unplug the computer and
connect wirelessly.)