Mediabridge MWN-WAPR150N User Guide - Manual (Page 49)

MWN-WAPR150N Wireless Router v11.8
49
Network Connections > Right Click Local Area
Connection > Status > Support Tab > Write down the
Default Gateway.
b. Vista: Click on Start > Control Panel > Network
and Sharing Center > Manage Network Connections >
Right Click Local Area Connection > Status > Details >
Write down the Default Gateway
c. Windows 7: Click on Start > Control Panel >
Network and Internet > Network and Sharing Center >
Change Adapter Settings > Right Click Local Area
Connection > Status > Details > Write down the Default
Gateway
3. Once you have the Gateway, disconnect the original router
from your computer. Next, connect the Medialink router
directly to the computer via an Ethernet cable (plug one end
of the Ethernet cable to one of the Yellow LAN Ports of the
Medialink Router. Plug the other end into the network port
of your computer). Then, connect the AC/DC Adapter to the
router’s Power port. Connect the other end into an electrical
outlet. Wait 30 seconds to allow the router to fully start.
4. Login to the Medialink router
a. launch a web browser such as Internet Explorer or
Firefox and enter the Router’s default IP address,